MOBILE SCANNING RIG

The Mobile Scanning Rig is a tool designed to aide in the timely and efficient scanning of documents using mobile devices with high resolution photography. The legs of the rig unfold and tighten in order to provide your mobile device a fixed height above documents. Coupled with other hardware or software features, such as remote shutter or auto-cropping, the Mobile Scanning Rig becomes a powerful tool and integral part of a quick and painless work flow for scanning in volume.

The Mobile Scanning Rig is 3D printed and requires some common hardware that can be found at most hardware stores (see below for specs). Initial assembly takes anywhere between 30 and 45 minutes with a few simple tools and our detailed instructions. The full 3D print file is available for download on this page, or an order may be placed with the iSchool IT lab. All units are sold in raw printed format at cost for $8.00, payable only with BevoBucks.

Qty.Hardware (provided)
4 #10 - 24 Type "A" Wingnut
2 #10 - 24 X 1-1/2 Course A307 Carriage Bolt 
2 #10 - 24 X 2 Course A307 Carriage Bolt
MethodTotal Scan Time (10 pgs)
Flatbed Scanner 17 minutes
Mobile Scanning Rig 5 minutes
Recommended Tools (available at IT Lab)
Needle/Snub Nose Pliers
Sheet 60-80 Grit Sandpaper
Pocket Knife
Assembly
Assembly Time 45 min. - 1 hr.
Difficulty Involved

To make your own prints, download the .STL file and take it to your local 3D printer



Mobile Scanning Rig by Logan J. Fry is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.Creative Commons License

SCAN DOCUMENTS USING THE MOBILE SCANNING RIG

To assemble a Mobile Scanning Rig, see the Assembly instructions.


ORDER A MOBILE SCANNING RIG:

Fill out the form and pick up your mobile scanning rig from the lab. Assembly instructions will be emailed 
to you.


glqxz9283 sfy39587stf02 mnesdcuix8
sfy39587stf03
sfy39587stp14